1.0mm Aluminum Alloy Flat Panel Rolling Shutter Door Corrosion Resistant For Warehouse
Product Summary
Industrial 80 Type 1.0mm Aluminum Alloy Flat Panel Rolling Shutter Door Warehouse A reinforced aluminum workhorse for warehouse and plant entrances, light enough to run often yet stiff enough to hold its line in wind. Product Overview Industrial 80 Type Aluminum Alloy Flat Panel Rolling Shutter Door ...
Product Custom Attributes
Flat Panel Rolling Shutter Door
,1.0mm Aluminum Rolling Shutter Door
,Flat Panel Warehouse Shutter Door
Product Description
A reinforced aluminum workhorse for warehouse and plant entrances, light enough to run often yet stiff enough to hold its line in wind.
The Industrial 80 Type 1.0mm Aluminum Alloy Flat Panel Rolling Shutter Door pairs reinforced 80 mm flat-panel aluminum slats with a high-cycle motor so it survives daily opening at busy loading bays while staying light and corrosion resistant. Lianxin Chitai sizes the guides and shaft to the opening, and rates the drive for the cycle volumes a logistics site actually sees.
Built for throughput and weather, every unit is specified around real cycle counts, wind exposure and light weight.
1.0 mm alloy with deeper ribbing resists deflection and impact.
Aluminum keeps the curtain light for high-cycle duty.
Industrial motor rated for frequent daily operation.
Alloy and coating suit humid and coastal sites.
Holds its line on large warehouse openings.
Individual slats are replaceable after damage.
Standard parameters are listed below. Custom sizes, slat thickness, and operation are available on request.
| Curtain Material | 1.0 mm aluminum alloy flat-panel slats, reinforced |
|---|---|
| Slat Type | 80-type flat panel, double wall option |
| Slat Height | 80 mm |
| Max Width | 7000 mm |
| Max Height | 7000 mm |
| Wind Resistance | Up to Class 4 (EN 13241) / 700 Pa |
| Cycle Rating | 50,000+ cycles |
| Operation | External motor 220/380V / manual crank |
The components that let a light aluminum shutter take wind and traffic day after day.
Aluminum keeps the curtain light, which lowers motor duty on high-cycle openings, but wind load still scales with size. We answer with a 1.0 mm reinforced flat-panel profile and deeper ribs for stiffness, then brace the guides on wide spans so the lateral wind reaction is shared with the building. The shaft diameter is set from the coiled curtain weight to avoid sag, keeping the light slats level through the guides.
An industrial process focused on strength, light weight and repeatable quality.
Aluminum coil roll-formed into reinforced flat-panel slats.
Powder coat or anodize for corrosion protection.
Guides and bracing welded or bolted and checked.
Slats, shaft, bottom bar and motor built to opening size.
Counter-tension set so the curtain runs smoothly under load.
Load and open-close cycles run before dispatch.
Where frequent use meets real weather exposure.
Daily truck access with wind-rated closure.
High-cycle doors across large dock fronts.
Weather closure for machinery and storage halls.
Alloy resists salt where steel would corrode.
Site and structural requirements for a safe industrial fit.
- Reveal able to carry full guide and curtain reactions.
- Concrete or steel lintel sized for the shaft and curtain weight.
- Three-phase 380V or single-phase 220V supply at the motor head.
- Wind bracing specified on openings above 5000 mm.
- Clear service access to the coiled curtain and motor for maintenance.
Keep a busy aluminum shutter running and within rating.
- Inspect slats and guides monthly on high-cycle openings.
- Lubricate shaft bearings and guides every 3 months.
- Keep the motor and chain free of dust and debris.
- Check bottom seal and safety devices quarterly.
- Log cycles and replace wear items before the rated count is reached.
Questions about industrial 80-type aluminum alloy shutters.
How many cycles can it handle?
The industrial drive and reinforced slats are rated for 50,000+ open-close cycles; we size the motor to your daily count.
What wind class is available?
Standard industrial units reach Class 4 (about 700 Pa); bracing and reinforced guides extend performance on wide openings.
Is aluminum strong enough for a warehouse?
Yes. The 1.0 mm reinforced flat-panel profile with deeper ribs carries normal wind and impact loads while staying light.
What voltage does the motor need?
Industrial units use 380V three-phase; a 220V option is available for smaller sizes.
How wide can one shutter go?
Up to 7000 mm; larger openings use divided shutters plus bracing.
Is a manual backup included?
Yes, a manual crank override is standard on every industrial unit.
How fast does it open?
Around 0.18 - 0.28 m/s, balanced for a light curtain and safe traffic.
Does it resist salt corrosion?
Aluminum alloy with a quality coating resists coastal corrosion far better than bare steel.
What maintenance interval applies?
Monthly visual and quarterly service on busy bays; we supply a log sheet tied to the cycle rating.
Can slats be replaced individually?
Yes. Damaged slats are unlinked and replaced without rebuilding the whole curtain.
Tell us your opening size, wind class and operation need. We return a tailored proposal with lead time.
Email ouqiu850@gmail.comContact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
