Slim Profile Metal Roller Shutter Door Corrosion Resistant Steel Roll Up Shutters
Product Summary
Product Overview Modern Minimal Steel Wind Resistant Rolling Shutter Door The Modern Minimal Steel Wind Resistant Rolling Shutter Door uses slim double-wall slats and a compact coil so it fits shallow reveals common in urban storefronts, while still carrying a real wind rating. Lianxin Chitai keeps ...
Product Custom Attributes
Corrosion Resistant Metal Roller Shutter Door
,Wind Resistant Steel Shutter Door
,Slim Profile Metal Roller Shutter Door
Product Description
The Modern Minimal Steel Wind Resistant Rolling Shutter Door uses slim double-wall slats and a compact coil so it fits shallow reveals common in urban storefronts, while still carrying a real wind rating. Lianxin Chitai keeps the visible line clean with a low box profile and a quiet drive that suits residential-ground and boutique settings.
Designed for tight reveals and tidy elevations without giving up wind performance.
Compact coil fits shallow urban reveals and soffits.
Uniform slats give a tidy closed elevation.
Soft-start motor keeps noise low in mixed-use streets.
Wind-rated slats suit exposed street fronts.
Small box leaves more headroom inside.
Low headroom box pairs with signage and lighting.
Standard parameters are listed below. Custom sizes, slat thickness, and operation are available on request.
| Curtain Material | Slim double-wall color-coated steel slats |
|---|---|
| Slat Height | 60 - 77 mm |
| Max Width | 6000 mm |
| Max Height | 6000 mm |
| Wind Resistance | Up to Class 3 (EN 13241) / 500 Pa |
| Opening Speed | 0.15 - 0.25 m/s |
| Box Depth | Compact 300 - 350 mm coil housing |
| Operation | Tubular motor 220V / manual |
How a slim shutter still earns its wind rating.
Narrow double-wall profile for compact coils.
Small coil housing saves headroom and reveal depth.
Lined guide keeps operation low-noise.
Light bottom bar with rubber for weather seal.
A minimal shutter trades slat height for coil size, so we keep wind resistance by using a thicker double-wall section at the narrower pitch and by tying the guides firmly to the reveal. The compact box is achieved with a smaller shaft diameter matched to the lighter, shorter curtain, preserving headroom without sacrificing the rated pressure.
A tidy, space-conscious build with the same QC discipline.
Steel roll-formed into narrow double-wall slats.
Color-coated to the specified RAL finish.
Compact coil housing and shaft assembled.
Lined guides and motor set to size.
Run tested for noise and smooth travel.
Flat-pack components for easy urban delivery.
Minimal units are checked for fit, finish and quiet run.
Coating inspected for uniform color and edges.
Coil housing measured for headroom claim.
Run noise sampled against the quiet spec.
Smooth open-close verified on the bench.
Where space and looks matter as much as wind rating.
Boutique and cafe fronts on busy streets.
Home and lobby shutters in residences.
Compact kiosks and market units.
Back-of-house and service openings.
Compact reveals need accurate dimensions up front.
- Reveal measured precisely; shallow soffits limit box size.
- Lintel able to take the compact coil and guide load.
- Single-phase 220V supply at the motor head.
- Clearance kept for the small coil housing.
- Signage or lighting coordinated with the low box.
Light upkeep for a small, frequently used shutter.
- Wipe slats and guides every few months in city dust.
- Lubricate guides and shaft twice a year.
- Check bottom seal and safety each quarter.
- Test manual override every 3 months.
- Keep the box clear of stored items above.
Questions about minimal steel wind-resistant shutters.
How shallow a reveal can it fit?
The compact coil housing is 300 - 350 mm deep, suiting shallow urban soffits and tight headrooms.
Does the slim slat still resist wind?
Yes, a thicker double-wall section at the narrow pitch keeps a real Class 3 wind rating.
Is it quiet for homes?
A soft-start motor and lined guides keep operating noise low, good for residential ground floors.
What colors are available?
Slats are color-coated to a specified RAL to match the storefront and signage.
How wide can it go?
Up to 6000 mm; beyond that we review the reveal and wind class.
What voltage does it need?
A single-phase 220V tubular motor is standard for the minimal size.
Can I add lighting or signage?
The low box is designed to pair with fascia signage and lighting.
Is a manual backup included?
Yes, a manual override is standard on every unit.
How fast does it open?
Around 0.15 - 0.25 m/s, balanced for a light, quiet curtain.
Can slats be replaced individually?
Yes, damaged narrow slats unlink and swap without rebuilding the curtain.
Tell us your opening size, wind class and operation need. We return a tailored proposal with lead time.
Email : ouqiu850@gmail.comContact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
