Industrial Overhead Sectional Door Galvanized Steel Factory Lifting Sectional Door
Product Summary
Standard Industrial Sectional Overhead Door | General Factory Lifting Sectional Door This general‑purpose sectional overhead door is developed for ordinary manufacturing workshop building openings. Insulated PU sandwich panels together with galvanized heavy‑duty hardware deliver stable daily ...
Product Custom Attributes
Motor Driven Standard Lift Operation
,Galvanized Steel Factory Entry Door
,Electric Motor Automatic Operation
Product Description
This general‑purpose sectional overhead door is developed for ordinary manufacturing workshop building openings. Insulated PU sandwich panels together with galvanized heavy‑duty hardware deliver stable daily operation. Equipped with complete multi‑safety protection mechanisms, it balances thermal insulation, wind‑proof sealing and cost‑efficiency for regular industrial building projects.
The standard sectional overhead door adopts upward‑sliding sectional panel structure. Panels run along curved track and turn flat under ceiling after opening, saving ground space. It works for indoor‑outdoor separation of factory workshops. The whole set adopts mature and stable configuration, suitable for most general‑industrial scenarios where no extreme low‑temperature or heavy corrosion environment exists.
40mm thickness as standard option, steel sheet outer skin with powder coating, inner filled with high‑density PU foam for thermal insulation and sound reduction. 50mm reinforced panel is available upon request.
Hot‑dip galvanized track, hinges, roller brackets and torsion spring balance group, good anti‑rust performance for normal factory environment. Sealed rollers reduce operating noise.
AC industrial motor with stable output torque; basic control includes push‑button box and remote controller; extended access‑control sensors can be added on demand.
Safety bottom edge, infrared photoelectric sensor, spring‑break protection device, mechanical upper‑lower limit prevent accidental injury during door movement.
EPDM rubber sealing strips installed on top, side and bottom positions, lower wind dust and noise transfer between inside and outside workshop.
- Mature stable configuration, cost‑effective solution for general factory workshop
- Upward sliding structure saves floor space, no occupation to ground passage area
- PU insulated panels achieve basic heat preservation and noise reduction performance
- Complete set of safety devices guarantee daily operation security for site staff
- Rich optional configurations: vision window, wicket door, high‑wind‑resistance reinforcement, various RAL color options
| Item | Specification |
|---|---|
| Max Custom Size | W:7500mm * H:6000mm |
| Panel Thickness | 40mm (standard), optional 50mm |
| Panel Surface | Hot‑dip galvanized steel with powder coating |
| Operation Cycles | 60‑80 cycles per hour |
| Wind Resistance | 400‑550 N/m² |
| Sealing Material | EPDM rubber |
| Surface Color | Custom RAL colors |
1. Raw‑material inspection for steel plate, PU foam and metal hardware.
2. CNC cutting and bending for sectional panel blanks.
3. High‑pressure PU foam injection for panel core filling.
4. Surface powder‑coating treatment for steel panels.
5. Hardware component surface anti‑rust processing.
6. Pre‑assembly simulation test before product packing.
Steel material thickness inspection; PU foam density test; hardware salt‑spray sampling inspection; whole‑door repeated opening‑closing cycle test; safety‑device trigger test; sealing performance visual check.
General manufacturing workshops, machinery processing plants, assembly workshops, material production workshops, ordinary industrial plant building access openings.
Reserve enough lintel headroom and side room for curved‑track layout; solid wall structure for hardware anchoring; stable power supply reserved. We provide installation drawing for civil‑work reference.
Weekly: Clear dust and debris on track and roller surface.
Monthly: Lubricate rollers and hinge joints; inspect sealing strips for wear.
Quarterly: Check spring tension and bolt fastening status; verify all safety devices work normally.
Half‑yearly: Comprehensive inspection for motor and control system performance.
Insulated PU panels, galvanized track & hinges, torsion spring balance set, industrial motor control unit, full‑perimeter rubber seals and multi‑safety protection accessories.
Max width 7500mm, max height 6000mm, custom non‑standard dimensions are acceptable.
40mm PU sandwich panel as standard; 50mm thickness is optional for higher thermal insulation requirement.
Safety bottom edge, photoelectric infrared sensor, spring‑break protection, mechanical limit stop for upward and downward travel.
Push‑button station, remote control; optional radar motion sensor, key‑switch access control.
Polycarbonate transparent vision windows can be embedded for interior light transmission and visual observation.
Yes, wicket door can be configured for frequent personnel passing without lifting the whole door panel.
Standard industrial motor supports 60‑80 opening‑closing cycles every hour for normal workshop usage.
Standard wind resistance 400‑550 N/m², reinforced hardware for higher wind‑load regions.
Product datasheet, general arrangement drawing, material specification list can be provided for project reference.
Send us your door opening dimensions, site headroom condition and required optional configurations. We will deliver tailored specification sheet and quotation for standard sectional overhead door project.
Technical datasheet and installation drawing can be supplied upon inquiry.
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
